EPS-500 External Power Supply Unit (Model 10911) compatibility with the Summit X440 48t and 48P.

  • 0
  • 1
  • Question
  • Updated 3 years ago
  • Answered
Hi, Can anyone tell me if the EPS-500 External Power Supply Unit (Model 10911) is compatible with the Summit X440 48t and 48P. The pins look like they will connect but I just wanted to be sure.
Photo of Raghurajan, Sandeep

Raghurajan, Sandeep, Employee

  • 172 Points 100 badge 2x thumb

Posted 3 years ago

  • 0
  • 1
Photo of Ronald Dvorak

Ronald Dvorak, Embassador

  • 45,132 Points 20k badge 2x thumb
Hi, doesn't look like if you check the datasheet...
http://learn.extremenetworks.com/rs/extreme/images/Summit-X440x-DS.pdf

-Ron
Photo of Bill Stritzinger

Bill Stritzinger, Alum

  • 6,016 Points 5k badge 2x thumb
I do not believe that the EPS-500 is compatible with the X440, there is firmware that it needs to work correctly and the 500 is an old unit with a fixed power supply.  The one compatible is the EPS-C2.
Photo of Bharathiraja, Suresh

Bharathiraja, Suresh, Employee

  • 3,442 Points 3k badge 2x thumb
Hi Sandeep,

EPS-500 External Power Supply Unit (10911) can be used for below models.

• Summit X150-24p switch
• Summit X250e-24p switch
• Summit X350-24t switch
• Summit X350-48t switch
• Summit X450a-24t switch
• Summit X450a-24x switch
• Summit X450a-48t switch
• Summit X450e-24p switch
• Summit X450e-24t switch
• Summit X450e-48t switch

Thanks,
Suresh.B
Photo of Syed Arshad

Syed Arshad

  • 204 Points 100 badge 2x thumb
Yes it is compatiable

Regards
Syed Arshad
Photo of Drew C.

Drew C., Community Manager

  • 37,350 Points 20k badge 2x thumb
Have you used the EPS-500 successfully on one of your X440s?
Photo of Syed Arshad

Syed Arshad

  • 204 Points 100 badge 2x thumb
Nope. My bad it doesn't i beleive. 440 support RPS-500p. 

Apologies