error run show openflow command

  • 0
  • 1
  • Problem
  • Updated 3 years ago
  • Solved
my extreme switch x440 have openflow license when run " show openflow" command see this error:
Error:can't read "XmlData(reply.message.openflowglobalconfig.isenables)" no such element in array.

and then i Can't use command with openflow such as show openflow or other command.
Photo of Mikaeil Beigpour

Mikaeil Beigpour

  • 150 Points 100 badge 2x thumb

Posted 3 years ago

  • 0
  • 1
Photo of Prashanth KG

Prashanth KG, Employee

  • 5,300 Points 5k badge 2x thumb
Hi Mikaeil,

Please refer the article below for enabling openflow license.

https://gtacknowledge.extremenetworks.com/articles/Q_A/What-type-of-license-is-required-for-ExtremeXOS-OpenFlow/

Hope this helps! 

if you are still facing the issue, please execute provide the output of show license and show version images.
(Edited)
Photo of Mikaeil Beigpour

Mikaeil Beigpour

  • 150 Points 100 badge 2x thumb
Photo of Prashanth KG

Prashanth KG, Employee

  • 5,300 Points 5k badge 2x thumb
the license is installed as per the output above. Can you please execute the command show version images and share the output?

Also, try the command "run update" and then execute the openflow commands. There seems to be a process crash in the switch for which I would recommend you to contact TAC. 

Thanks
Photo of Mikaeil Beigpour

Mikaeil Beigpour

  • 150 Points 100 badge 2x thumb
X440-48t.2 # show version images
Card  Partition     Installation Date        Version     Name      Branch
------------------------------------------------------------------------------
Switch primary   Mon May 25 19:37:17 UTC 2015 15.7.1.4 summitX-15.7.1.4.xos v1571b4
Switch primary   Mon May 25 19:59:37 UTC 2015 15.7.1.4 summitX-15.7.1.4-openflow.xmod v1571b4
Switch secondary Mon May 25 20:22:20 UTC 2015 15.5.3.4 summitX-15.5.3.4.xos v1553b4
Switch secondary Mon May 25 20:30:59 UTC 2015 15.5.3.4 summitX-15.5.3.4-openflow.xmod v1553b4
Photo of Bill Stritzinger

Bill Stritzinger, Alum

  • 6,016 Points 5k badge 2x thumb
Based on the posted information it looks like you have everything configured as you should.  There is no "run openflow" - I would suggest you get the user guide from the web site for reference: http://documentation.extremenetworks.com/exos/EXOS_All/Preface/c_introduction.shtml


The commands for openflow are the following:
configure openflow add logical-port, 

configure openflow controller,

configure openflow default-rule bddp

configure openflow default-rule iparp

configure openflow default-rule lldp


configure openflow default-rule miss


configure openflow delete logical-port


configure openflow version


configure openflow vlan mode

debug openflow show flows




debug openflow

disable openflow




disable openflow vlan


disable openflow vlan mode

enable openflow




enable openflow vlan


enable openflow vlan mode

show openflow




show openflow controller


show openflow flows


show openflow groups


show openflow ports


show openflow vlan

unconfigure openflow controller


clear openflow counters