error while tarring/zipping config, config could not be saved

  • 0
  • 1
  • Question
  • Updated 1 year ago
  • Answered
Good morning,
i have a question about an Extreme x670 G2 Switch error messages.
We use 2 extreme 670 G2 Switche for the redundant connection our server.
Both are configured as a stack.to upgrade the number of ports if necessary.
When we save the configuration, one switch will displayed me the following error message.

error while tarring/zipping config, config could not be saved on Standbys!

I can see that the configuration file save  correctly with the new date and time.
We use version 15.6.4.2 .

On both switches are the sane configuration, one switch displayed me this error-message.
Why?









 


Photo of dr.watson

dr.watson

  • 276 Points 250 badge 2x thumb

Posted 1 year ago

  • 0
  • 1
Photo of Ram

Ram, Employee

  • 1,450 Points 1k badge 2x thumb
Photo of dr.watson

dr.watson

  • 276 Points 250 badge 2x thumb
Excause me, we have do this before i wrote my question.
Sorry i forgot it to write in my text
Photo of dr.watson

dr.watson

  • 276 Points 250 badge 2x thumb
Some Information what i have done on myy summit.
 
rrm /usr/local/tmp/*
NOTE: This will remove all files from /usr/local/tmp.
Continue? (y/N)
Continue? (y/N) Yes
Slot-1 MLAG_205.17 # ls /usr/local/tmp
drwxrwxrwx    2 root     root         1024 Mar 14 08:33 dhcp

 1K-blocks      Used Available Use%
    423648    423648         0 100%
Slot-1 MLAG_205.18 #
save configuration
The configuration file primary.cfg already exists.
Do you want to save configuration to primary.cfg and overwrite it? (y/N) Yes
Saving configuration on master .... done!
error while tarring/zipping config, config could not be saved on Standbys!


It is the same error then before.
(Edited)
Photo of David Choi

David Choi, Employee

  • 1,966 Points 1k badge 2x thumb

Hi dr.watson,

In your output, it looks like the usage of internal memory still 100% (not sure why it was not cleared 100%) even though you executed the "rm /usr/local/tmp/*" command.

Slot-1 MLAG_205.17 # ls /usr/local/tmp
drwxrwxrwx    2 root     root         1024 Mar 14 08:33 dhcp

 1K-blocks       Used    Available   Use%
      423648    423648                 0    100%

Youn can see that 100% is still used (423648 / 423648) and 0 available (Use% is 100% as well).

I think there might be a possiblity of HW defect on the internal-memory in the swtich. I would recommend kindly open a ticket for this failure and check if this switch should be replaced or not.

Photo of Drew C.

Drew C., Community Manager

  • 37,366 Points 20k badge 2x thumb
GTAC should be able to look at the file usage in depth with debug-mode and can remove any files that might be stuck in the wrong place.
For example, a failed software upgrade could potentially leave files in a temporary folder that users can't access through normal CLI processes.