error saving config

  • 0
  • 1
  • Question
  • Updated 5 years ago
  • Answered
Create Date: Aug 15 2013 7:36PM

Hello, I am receiving the following error when attempting the save command:

# save
The configuration file primary.cfg already exists.
Do you want to save configuration to primary.cfg and overwrite it? (y/N) Yes
Saving configuration on master ....... error!
Error: Input/output errorSetting gCmServer.configCurrent to NULL!!

This switch is an X250e-48t.  It appears the last time the config was saved was on 15 Nov 2012.

# sh ver
Switch    : 800212-00-02 0723G-01956 Rev 2.0 BootROM: 1.0.2.2    IMG: 12.0.1.11
XGM2-1    : N/A          N/A         Rev 0.0 BootROM:

Image   : ExtremeXOS version 12.0.1.11 v1201b11-patch1-4 by release-manager
          on Fri Jul 13 14:36:19 PDT 2007
BootROM : 1.0.2.2

Any suggestions?  Thanks.

(from kmoyers)
Photo of EtherNation User

EtherNation User, Employee

  • 20,340 Points 20k badge 2x thumb

Posted 5 years ago

  • 0
  • 1
Photo of EtherNation User

EtherNation User, Employee

  • 20,340 Points 20k badge 2x thumb
Create Date: Aug 16 2013 12:04PM

Hello kmoyers


i have never seen this error.  Can you save it as another config name?  Save config secondary. As an example.

p

(from Paul_Russo)
Photo of EtherNation User

EtherNation User, Employee

  • 20,340 Points 20k badge 2x thumb
Create Date: Aug 16 2013 4:39PM

negative.  same error.

# save config secondary
Do you want to save configuration to secondary.cfg? (y/N) Yes
Saving configuration on master ....... error!
Error: Input/output errorSetting gCmServer.configCurrent to NULL!!
(from kmoyers)
Photo of EtherNation User

EtherNation User, Employee

  • 20,340 Points 20k badge 2x thumb
Create Date: Aug 16 2013 6:00PM

Hello kmoyers


I suggest opening a case with TAC.  I did search for internal information on this error and in the cases I saw there was a RMA involved.


Hope this helps

Good luck

P

(from Paul_Russo)
Photo of EtherNation User

EtherNation User, Employee

  • 20,340 Points 20k badge 2x thumb
Create Date: Aug 16 2013 8:25PM

Roger.  Thanks for your input.

(from kmoyers)

This conversation is no longer open for comments or replies.