EXOS 16.1.1 supports VLAN IDs (VID)s

  • 2
  • 5
  • Article
  • Updated 2 years ago
  • (Edited)
Did you know ...
In EXOS 16.1.1, over 50 VLAN commands were enhanced to support VID lists/ranges to simplify configuration.

E.g. create vlan 10-20
Creates VLANs with the VIDs 10,11,12 etc...
EXOS still uses VLAN names internally so the VLAN names are created for you as VLAN_0010, VLAN_0011 etc ...

The list of commands below were all enhanced to accept which is the numeric VID form for VLANs.

A can be comma or dash separated numbers:

E.g.: 2,3,5-35 (VID 2,3 and all VIDs in the range of 5-35)

Here's the list of CLI commands that were enhanced.

clear l2stats vlan
configure ip-mtu vlan
configure policy maptable [response [tunnel | policy | both] | ]
configure policy profile {name } {pvid } {pvid-status } {cos } {cos-status } {egress-vlans } {forbidden-vlans } {untagged-vlans } {append | clear} {tci-overwrite } {precedence } {mirror-destination } {clear-mirror | prohibit-mirror | syslog } {trap } {disable-port } {fst } {web-redirect }
configure ports [ | all] monitor vlan {rx-only | tx-only}
configure ports {tagged} vlan [limit-learning { action [blackhole | stop-learning]} | unlimited-learning]
configure ports {tagged} vlan [lock-learning | unlock-learning]
configure {stpd} add vlan ports [all | ] {dot1d | emistp | pvst-plus}
configure {stpd} delete vlan ports [all | ]
configure vlan [ | ] add ports [all | ] {tagged | untagged} {stpd} {dot1d | emistp | pvst-plus}
configure vlan [ | ] add ports [ | all] {tagged | untagged | private-vlan translated }
configure vlan [ | ] delete ports [ | all]
configure vlan [ | ] protocol {filter}
configure vlan [ | ] {qosprofile} [ | none]
configure vman [ | ] delete ports [ | all]
configure vman [ | ] ports [ | all] delete cvid { - }
configure vman [ | ] protocol {filter}
configure vman [ | ] {qosprofile} [ | none]
create vlan {vr } {description }
create vman {vr } {description }
delete vlan
delete vman
disable {stpd} auto-bind vlan
[enable | disable] iparp gratuitous protect vlan
[enable | disable] ipforwarding {ipv4} vlan
[enable | disable] ipforwarding ipv6 vlan
[enable | disable] learning [ vlan | vman ]
[enable | disable] learning [ vlan | vman ]
[enable | disable] loopback-mode vlan
[enable | disable] vlan
enable {stpd} auto-bind vlan
show fdb stats vlan
show fdb vlan {netlogin [all | mac-based-vlans]}
show iparp security vlan
show iparp stats vlan
show iparp vlan
show ip dad vlan {tentative | valid | duplicate}
show ip-security arp learning vlan
show ip-security arp validation violations vlan ports [|all]
show ip-security arp validation vlan
show ip-security dhcp-snooping entries vlan
show ip-security dhcp-snooping information-option circuit-id vlan-information vlan
show ip-security dhcp-snooping violations vlan
show ip-security dhcp-snooping vlan
show ipv6 dad vlan {tentative | valid | duplicate} {detail}
show l2stats vlan
show neighbor-discovery {cache {ipv6}} vlan
show netlogin authentication [service-unavailable | failure] vlan
show netlogin guest-vlan
show netlogin {port } vlan
show netlogin {port } vlan dot1x detail
show policy maptable { }
show vlan security
show vlan statistics
show vlan stpd {blocked-ports}
show [vlan | vman ] {ipv4 | ipv6}
show [vlan | vman ] {ipv4 | ipv6}
show vrrp vlan {stats}
unconfigure policy maptable [ response | ]
unconfigure ports [ | all] monitor vlan
unconfigure vlan ipaddress
unconfigure vman ipaddress
Photo of Dave Hammers

Dave Hammers, Dir SW Engineering

  • 3,722 Points 3k badge 2x thumb

Posted 2 years ago

  • 2
  • 5
Photo of Brad Parker

Brad Parker, Technical Support Engineer

  • 3,592 Points 3k badge 2x thumb
Awesome work, thanks Dave!
Photo of Kevin Kim

Kevin Kim, Employee

  • 2,266 Points 2k badge 2x thumb
It's cool. Thanks!