EXOS MLAG Configuration

  • 0
  • 2
  • Question
  • Updated 5 months ago
  • Answered
I have two stacks of 870s as a Core and X690 as an edge switch. To create MLAG, I found peer & ISC configuration details from below:

https://gtacknowledge.extremenetworks.com/articles/How_To/How-to-configure-MLAG-in-Extreme-switches

But I couldn't found any article covering both core and edge configuration for EXOS MLAG just like in below case where core is EXOS and edge is EOS:

https://gtacknowledge.extremenetworks.com/articles/Q_A/How-to-configure-MLAG-with-EXOS-core-switches...

Please advise
Photo of Waqas Naeem

Waqas Naeem

  • 896 Points 500 badge 2x thumb

Posted 5 months ago

  • 0
  • 2
Photo of Ronald Dvorak

Ronald Dvorak, Embassador

  • 50,114 Points 50k badge 2x thumb
For the access switch the 2x core switches look like one switch (that's the main function of MLAG) - so you just configure a normal LAG on the access switch 

https://gtacknowledge.extremenetworks.com/articles/How_To/How-to-create-or-delete-a-share-group-in-E...
Photo of Waqas Naeem

Waqas Naeem

  • 896 Points 500 badge 2x thumb
Thanks Ronald for clarification and assistance.