EXOS: vlan related bootprelay statistics

  • 0
  • 1
  • Question
  • Updated 4 months ago
  • Answered
This command is very very helpful to troubleshoot bootprelay issue on a EXOS L3 Switch:

SW01.13 # sh bootprelay
Bootprelay : Enabled on virtual router "VR-Default"
Include Secondary : Disabled
DHCP Relay Agent Information Option : Disabled on virtual router "VR-Default"

Bootprelay servers for virtual router "VR-Default":
Destination: 10.1.1.1 10.2.2.2 10.3.3.3

DHCP/BOOTP relay statistics for virtual router "VR-Default"
Received from client = 1126377 Received from server = 397536
Requests relayed = 2799077 Responses relayed = 397536
DHCP Discover = 134589 DHCP Offer = 49549
DHCP Request = 43473 DHCP Ack = 345132
DHCP Decline = 30 DHCP NAck = 2856
DHCP Release = 6
DHCP Inform = 951088

Note: Default Remote-ID : System MAC Address
SW01.14 #

This statistics are global and in a productive environment this counters are not very helpful if i want to troubleshoot why on a specific vlan dhcp is not working and a lot of other vlans with working dhcp traffic.

So i need this statistics VLAN related. So i need  "show bootprelay vlan XXX".

But it seems this was not implemented.
Do i overseen something ?

PS: Yes i could write a ACL which counts for a specific VLAN interfaces - but this not an option for me.

Regards
Photo of M.Nees

M.Nees, Embassador

  • 9,264 Points 5k badge 2x thumb

Posted 4 months ago

  • 0
  • 1
Photo of M.Nees

M.Nees, Embassador

  • 9,264 Points 5k badge 2x thumb
You can clear all bootprealy counters with:

clear counters
Photo of M.Nees

M.Nees, Embassador

  • 9,264 Points 5k badge 2x thumb
It seems this is currently not provided in EXOS CLI.

The only way to check that is setup an ACL for counting - but that is very very cumbersome.



Regards,
Matthias