cancel
Showing results forĀ 
Search instead forĀ 
Did you mean:Ā 

EXOS VM Virtualbox

EXOS VM Virtualbox

Waqas_Naeem
New Contributor II
This is my first time setting up EXOS VM on Virtual Box. I followed the Install Guide but not able to boot up the switch. Before deleting optical drive from storage option, it gives below message:

4831d19225fd43e590ccd5f159226d11_RackMultipart20160630-47906-rxsjhw-Cant_Open_inline.jpg



After deleting optical drive, it gives below message:

4831d19225fd43e590ccd5f159226d11_RackMultipart20160630-92086-6mq0ku-Not_Bootable_inline.jpg



Please advise, how to fix this
11 REPLIES 11

dflouret
Extreme Employee
Waqas, here's a quick and dirty guide to set up a new EXOS-VM in VirtualBox for OS X. The GUI for Windows is a bit different, but the steps are similar.

Create a new VM

728d0063371645899587eaa32d5b8074_30203-qeur0e_inline.png



Select Type: Linux and Version: Linux 2.6/3.x/4.x (32 bits)

728d0063371645899587eaa32d5b8074_4323-1rdete3_inline.png



You don't need much memory to run the VM. I use 256 MB. Adding more does not make much difference.

728d0063371645899587eaa32d5b8074_4323-dwqh7a_inline.png



Don't bother much when creating the disk, as we will delete this later...

Once you have finished, select Settings and then Storage. You will see that the disk was created as SATA. Delete it.

728d0063371645899587eaa32d5b8074_30203-1b86l92_inline.png



Select the IDE Controller and select Add New Virtual Hard Disk.

728d0063371645899587eaa32d5b8074_30203-1nbpo2y_inline.png



Select to create a new disk.

728d0063371645899587eaa32d5b8074_4323-y2xs7l_inline.png



I usually use VMDK format, Dynamic Assignment and no more than 400MB, but you can choose whatever you want.

728d0063371645899587eaa32d5b8074_4323-ur21bi_inline.png



After that, select the Optical Drive and put the ISO file in it.

728d0063371645899587eaa32d5b8074_30203-udapth_inline.png



Once you've done all this, your VM should look like this and you are ready to start it.

728d0063371645899587eaa32d5b8074_4323-535zbf_inline.png



When booting from the ISO file, it will ask to erase the virtual HD and set up a partition scheme. Say Y.

728d0063371645899587eaa32d5b8074_30203-5mdwd6_inline.png



When the process completes, it will ask for a reboot. DON'T REBOOT YET.

728d0063371645899587eaa32d5b8074_4323-1lpqa1p_inline.png



Before rebooting, remove the ISO file from the optical drive, or the previous process will repeat again.

728d0063371645899587eaa32d5b8074_30203-q2aw01_inline.png



Now, you can reboot. The VM should start normally.

728d0063371645899587eaa32d5b8074_4323-m7a2hb_inline.png



You can find more information on configuring the management port in your VM in this post:
https://community.extremenetworks.com/extreme/topics/exos-vm

Hope this helps.

Good, enjoy!

Many thanks; I am up and running with my FIRST EXOS VM switch šŸ™‚

StephenW
Extreme Employee
Waqas,

I was going to wait to post about this but it will help you out a lot. We have posted a NEW! and improved way to setup EXOS-VM to work with GNS3. It's the easiest way to build EXOS-VM networks that i know of. I didn't come up with it, but I made a guide for it. Try it out and let me know if the guide helps.

https://github.com/extremenetworks/Virtual_EXOS/blob/master/GNS3_EXOS-VM_Guide.md

Stephen
GTM-P2G8KFN