Export OSPF Cost 0 in EXOS 22.4.1

  • 0
  • 1
  • Question
  • Updated 3 months ago
  • Answered
Hi,

Why can I no longer export static routes into OSPF with a cost of 0 in EXOS 22.4.1?
I need to be able to export the actual cost of the route as configured in the iproute command.

Router-1 # enable ospf export static cost
  <cost>          cost value [0,1-65535]                <<<<<<<<<<<  Implies I can still use 0

Router-1 # enable ospf export static cost 0
                                                                  ^
%% Invalid input detected at '^' marker.
%% Input number must be in the range [1, 65535].  <<<<<<<<<<<<<  FAIL!

Cheers.
Photo of Stephen Elliott

Stephen Elliott

  • 1,244 Points 1k badge 2x thumb

Posted 4 months ago

  • 0
  • 1
Photo of Drew C.

Drew C., Community Manager

  • 40,690 Points 20k badge 2x thumb
Hi Stephen,
If you haven't already, it sounds a case should be opened so GTAC can send it to engineering for review.
How to contact Extreme Networks Global Technical Assistance Center (GTAC)
Photo of Stephen Elliott

Stephen Elliott

  • 1,244 Points 1k badge 2x thumb

Thanks Drew, some of the Extreme support team used to frequent these forums, so I was hoping for a bit of input from them before raising a case via our reseller.
Photo of Stephen Elliott

Stephen Elliott

  • 1,244 Points 1k badge 2x thumb
If anyone's interested this appears to be fixed in EXOS 22.5.