EXT3-fs warning

  • 0
  • 1
  • Question
  • Updated 2 years ago
  • Answered
hi,

what am I supposed to do when on a lot of X460G2-48t-10G4 the log shows:

09/26/2016 10:55:45.77 <Warn:Kern.Card.Warning> Slot-1: EXT3-fs warning: checktime reached, running e2fsck is recommended
09/26/2016 10:54:28.32 <Warn:Kern.Card.Warning> Slot-2: EXT3-fs warning: checktime reached, running e2fsck is recommended
09/26/2016 10:54:28.03 <Warn:Kern.Card.Warning> Slot-3: EXT3-fs warning: checktime reached, running e2fsck is recommended

thank you
--
antonio
Photo of Antonio Prado

Antonio Prado

  • 610 Points 500 badge 2x thumb

Posted 2 years ago

  • 0
  • 1
Photo of Karthik Mohandoss

Karthik Mohandoss, Employee

  • 6,058 Points 5k badge 2x thumb
Hi Antonio,

I would suggest to open up a case with GTAC for the same with the below outputs.

"show switch"
"show version"
"show log"
"show log messages nvram" 
Photo of Antonio Prado

Antonio Prado

  • 610 Points 500 badge 2x thumb
Just a follow-up.

This is what GTAC suggested:

Hi,
Unfortunately, the only way to solve this issue whole factory reset is necessary on all switches.
The stack should be broken and then rescue the image to all nodes from bootrom individually. This will erase all data from the switches. Then rebuild the stack and load the configuration. Please follow this article to complete rescue process: https://gtacknowledge.extremenetworks.com/articles/How_To/How-To-install-EXOS-Image-via-BootROM-on-G...

I'm concerned about the procedure: if something goes wrong (for example "No valid bootloader found" as already happened) I would need some spare X460G2-48t-10G4 devices.
--
antonio
Photo of Drew C.

Drew C., Community Manager

  • 40,238 Points 20k badge 2x thumb
Hi Antonio,
I'd suggest trying it on one switch to see if it helps (if you haven't already done that).  GTAC can also get you the bootloader images to reload if necessary.