Extreme XOS STP setup with existing Enterasys network

  • 0
  • 1
  • Question
  • Updated 3 years ago
  • Answered
When I loop a switch, I want the port to go down and stay down.  This doesn't work in 16.1.2.14-patch1.  The port comes back up and loops the network after a few seconds.  These x460G2's are integrating with an existing Enterasys network with one MSTI.
Photo of Jeremy

Jeremy, Embassador

  • 9,788 Points 5k badge 2x thumb

Posted 3 years ago

  • 0
  • 1
Photo of Johan Hendrikx

Johan Hendrikx

  • 3,650 Points 3k badge 2x thumb

I use the config:

configure elrp-client periodic <VLAN> ports all interval 1 log-and-trap disable-port permanent

This works

Photo of Jeremy

Jeremy, Embassador

  • 9,788 Points 5k badge 2x thumb
I would love to use ELRP, but we are going to be using policy.  When you use policy, ELRP no longer functions.  That is apparently by design, or so I have been told.
Photo of Tom Currier

Tom Currier, Employee

  • 720 Points 500 badge 2x thumb
Jeremy; 

The GTAC is investigating this and will respond directly.  We will create a case in your name for tracking.

Tom Currier