ExtremeCloud AP troubleshooting

  • 0
  • 1
  • Question
  • Updated 10 months ago
  • Answered
I've connected a new AP3935i-ROW in my home lab and I don't see it on my controller but the LEDs show connected and also that the AP radio is on.

I'd assume at this point that the AP is connected to the ExtremeCloud.

I'm connected via console and wonder how I'd check whether the AP is connected to ExtremeCloud..... what is the command, is there some output that I'd look for in "cget config global"

Thanks,
Ron
Photo of Ronald Dvorak

Ronald Dvorak, Embassador

  • 48,984 Points 20k badge 2x thumb

Posted 10 months ago

  • 0
  • 1
Photo of Doug Hyde

Doug Hyde, Technical Support Manager

  • 20,514 Points 20k badge 2x thumb
you will see httpc messages scrolling in the ap.log
(Edited)
Photo of Ronald Dvorak

Ronald Dvorak, Embassador

  • 48,984 Points 20k badge 2x thumb
Thanks Doug,

I've set the controller via static config and now I'd see it on my local controller.

-Ron
Photo of Ostrovsky, Yury

Ostrovsky, Yury, Employee

  • 3,050 Points 3k badge 2x thumb
If you want to remove the AP from the cloud entitlement please give us the SN of the device, so next time AP will not try to connect to cloud.