Failed to download image - Error: File could not be unwrapped

[Ahmed_AbdelFatt]

I am trying to download a new image to Summit X460-24p and I get the below error

# download image memorycard summitX-15.3.4.6-patch1-5.x primary
Downloading to Switch.............Error: Failed to download image - Error: File could not be unwrapped.

Any idea what could be causing the issue?

Thanks

[Alexandr_P]

Hi, all!

Is any body has a problem - that USB-flash can't mount?
USB mount normally only after reboot switch.

[Drew_C]

<content-quote data-username="Alexandr P">Hi, all!

Is any body has a problem - that USB-flash can't mount?
USB mount normally only after reboot switch.</content-quote>Slightly different topic, so we'll discuss separately. Please reference the new conversation here: USB drive doesn't mount until switch is rebooted

[Ahmed_AbdelFatt]

Switch: X460-24t has external USB ports, I put new image on the flash and used the below command and it works

"download image memorycard summitX-15.3.4.6-patch1-5.xos primary"

This is easier and faster than TFTP.

thanks alot all for your support !

[Paul_Thornton]

Drew's comment above about the VR is almost certainly why you can't make TFTP work. The switch is trying to reach the TFTP server using the mgmt port and not a configured VLAN.

You need to use something like:

download image summitX-15.7.1.4.xos vr vr-default primary