Flexview AP stats

  • 0
  • 1
  • Question
  • Updated 2 years ago
  • Answered
I'm trying to create a Flexview that shows the following OID's:

dot11ExtRadioAvgNfCount=1.3.6.1.4.1.4329.15.3.1.4.3.1.31
dot11ExtRadioMaxNfCount=1.3.6.1.4.1.4329.15.3.1.4.3.1.32
dot11ExtRadioAvgChlOccCount=1.3.6.1.4.1.4329.15.3.1.4.3.1.33
dot11ExtRadioMaxChlOccCount=1.3.6.1.4.1.4329.15.3.1.4.3.1.34

These stats return correctly, however I have no way of identifying the AP's "instance".

I tried adding the apName OID to the flexview which returns the names correctly, however it also seems to prevent the stats columns from populating data.  Any Tips?  Thanks much.
Photo of Joshua Puusep

Joshua Puusep

  • 2,264 Points 2k badge 2x thumb

Posted 2 years ago

  • 0
  • 1
Photo of Bob Maheu

Bob Maheu, Employee

  • 1,040 Points 1k badge 2x thumb
Hello Joshua,

Let me see if can set something up in our lab and check if there is an OID I can use to map back to that.
Photo of Bob Maheu

Bob Maheu, Employee

  • 1,040 Points 1k badge 2x thumb
Hello Joshua,

I'm not sure that you will be able to do this.  I have not found an OID that I can use to map the instance needed to get the AP name.
Photo of Joshua Puusep

Joshua Puusep

  • 2,264 Points 2k badge 2x thumb
Okay. Thanks for checking.
Photo of Thomas, Frank

Thomas, Frank, Employee

  • 1,902 Points 1k badge 2x thumb
Have you tried using ifname?
Photo of Joshua Puusep

Joshua Puusep

  • 2,264 Points 2k badge 2x thumb
TYVM!  This works as intended.
Photo of Thomas, Frank

Thomas, Frank, Employee

  • 1,902 Points 1k badge 2x thumb
Glad it does!