cancel
Showing results for 
Search instead for 
Did you mean: 

forward PTPv2 packets X430-8p

forward PTPv2 packets X430-8p

Amit_Geynis
New Contributor
I'm using X430-8p, and i saw it does not support PTP. So I just want the switch to forward PTP to all port without change. my setup is HUB like configuration. with the following command:
disable learning forward-packets port all
all packets i sent are forward except of the PTPv2 packets. what should I do?

2 REPLIES 2

Chad_Smith1
Extreme Employee
I don't see a reason why the switch wouldn't forward the packets. Is this multicast or unicast PTP? Is there a reason you are disabling learning?

What software version are you running and what other configuration changes have been made?

Karthik_Mohando
Extreme Employee
Hi Amit,

If you can match the packet using ACL then "redirect-port-list" can be used as action modifier and can be sent out through intended ports.

This article has the outline on how to create and configure access lists.
https://gtacknowledge.extremenetworks.com/articles/How_To/How-to-create-and-apply-an-ACL-in-EXOS

GTM-P2G8KFN