G/C3/B3-Series with "CBP cell CRC errors detected" Syslog messages

  • 0
  • 1
  • Article
  • Updated 5 years ago
  • (Edited)
Article ID: 12732 

Products
G-Series, C3-Series, B3-Series 

Symptoms
"<count> CBP cell CRC errors detected on SoC unit 0" messages appear in Syslog, 'show logging buffer', and 'show support'.
After the first message appearance, bridging/routing gets progressively slower, so poor network performance may be the first symptom noted.
The system may eventually crash. 

Here is an example of such a message:
<162>Nov 3 21:04:25 10.20.17.141-1 UNKN[119539480]: broad_system.c(3961) 2266 %%
2 CBP cell CRC errors detected on SoC unit 0

Solution/Workaround
Please contact the GTAC for assistance. 

Workaround: Power-cycling the switch will resolve the symptoms, short-term.
Photo of FAQ User

FAQ User, Official Rep

  • 13,610 Points 10k badge 2x thumb

Posted 5 years ago

  • 0
  • 1

There are no replies.

This conversation is no longer open for comments or replies.