cancel
Showing results for 
Search instead for 
Did you mean: 

GUI Interface on AP7522E

GUI Interface on AP7522E

James_Forsyth
New Contributor
I am unable to connect to the GUI on the access points connected to a VC, i can connect to the VC but one of the installation tests that we carry out is ensuring that we can browse to the non VC access points. It is an Express access point installation the firmware level is 5.8.5.0-016R
9 REPLIES 9

Mevan_Liyanage
New Contributor II
you can re enable it using CLI

Douglas_Novell
Extreme Employee
Just to add you can check the status of the adopted APs from the VC by going to Configuration-Access Points. This should list all of the APs adopted and their 'online' or 'offline' status.

Daniel_Mejia
Extreme Employee
APs adopted by a VC are to be managed by the VC. Therefor GUI access to adopted APs is disabled.

Christoph_S
Extreme Employee
Bear in mind that you cannot make any config changes to Express APs from CLI.
Christoph S.
GTM-P2G8KFN