cancel
Showing results for 
Search instead for 
Did you mean: 

hi guys what is the equivalent cisco command; spanning-tree and portfast to extreme.. Thanks in advance.

hi guys what is the equivalent cisco command; spanning-tree and portfast to extreme.. Thanks in advance.

Jun_Papa
New Contributor
hi guys what is the equivalent cisco command; spanning-tree and portfast to extreme.. Thanks in advance.
11 REPLIES 11

Jun_Papa
New Contributor
thanks you... i got this
Stpd: s0 Stp: ENABLED Number of Ports: 4
Rapid Root Failover: Disabled
Operational Mode: 802.1D Default Binding Mode: 802.1D
802.1Q Tag: (none)
Ports: 11*,13,14,23
Participating Vlans: Default,iptv
Auto-bind Vlans: Default,iptv
Bridge Priority : 32768
Operational Bridge Priority: 32768
BridgeID : 80:00:00:04:96:98:41:41
Designated root : 80:00:00:04:96:98:41:41
RootPathCost: 0 Root Port : ----
MaxAge : 20s HelloTime : 2s ForwardDelay : 15s
CfgBrMaxAge : 20s CfgBrHelloTime: 2s CfgBrForwardDelay: 15s
Topology Change Time : 35s Hold time : 1s
Topology Change Detected : TRUE Topology Change : TRUE
Number of Topology Changes : 1
Time Since Last Topology Change: 19s
Topology Change initiated locally on Port 23
Topology Change last received on Port none from none
Backup Root : Off Backup Root Activated : FALSE
Loop Protect Event Window : 180s Loop Protect Threshold : 3
New Root Trap : On Topology Change Trap : Off
Tx Hold Count : 6
Participating VLANs:
VLAN Tag Number of Ports
Ports
-------------------------------------------------------------------------------
Default 1 1
23(F)
iptv 14 4
11*(D),13(F),14(D),23(F)
Flags: B-Blocking, D-Disabled, F-Forwarding, I-Listening, L-Learning

Is it now working as expected? Did you set auto-bind up for the VLAN's? IDK if EZ-spantree is default on 16.xxx switches, but it is now for 22.xx.xx code. You can install this as an XMOD to help your config.
https://github.com/extremenetworks/EXOS_Apps/tree/master/EZ_SpanningTree

Jeremy_Gibbs
Contributor
enable stpd s0 auto-bind vlan Admin
enable stpd s0 auto-bind vlan AdminComputer
enable stpd s0 auto-bind vlan CiscoVideo
....
configure stpd s0 ports link-type edge 1:20
configure stpd s0 ports edge-safeguard enable 1:20
configure stpd s0 ports bpdu-restrict enable 1:20

Jeremy_Gibbs
Contributor
Here is my config
GTM-P2G8KFN