High CPU utilization wanring due to cli process in... - Extreme Networks - 42467

High CPU utilization wanring due to cli process in BD Switch

07/06/2015 02:23:31.40 MSM-A: CPU utilization monitor: process cli consumes 68 %% CPU

Can someone help here to solve this problem or any short command ..

i had checked TOP command also but not able to see any process going above 2% at present ..

Regards,
Narender

6 REPLIES 6

This should be an expected behaviour if you are executing 'show tech ' or show vlan info When you running other. Show commands do you see cli process spike ?

Hi Narender,

High CPU utilization from the CLI process is expected when running a show tech. This produces a large amount of text output, which is CPU intensive. If this is only occurring while running show tech, this would be expected behavior.

-Brandon

Hi ,

Yes CLI Process can increasing utilization when we are using Show tech but
due to same CPU utilization can touch 67% , i am not confident .

Can we check how to find issue of High Utilization ...

What version of XOS are you running and are you connecting to the Switch via the web console?

GTM-P2G8KFN