Its believe its running 6.2 something.
I have the instructions below, but I believe that defaults the sw, I would rather try to keep the config if I could
- Connect switch to local serial console;
- Cold boot your device (power of the device, wait a minute, power on the device);
- In the very beginning of the boot process press Space to enter boot menu;
- Follow this procedure to remove any configuration and passwords: [list=1]
- Press ā1ā to select primary boot image;
- Press ākā to erase current configuration;
- Press ādā to load default configuration;
- Press āfā to load switch with reset config;
The result of this procedure is a switch with default login: admin and an empty password.