How can I turn seamless roaming on V2110?

  • 0
  • 1
  • Question
  • Updated 1 year ago
  • Answered
Hello, everybody!

I have one V2110 controller (v10) and 10 APs. I need seamless roaming (mobility) for clients. How can I turned it on? The APs are 3805i, auth type is WPA-PSK.

Many thanks in advance,

Ilya
Photo of Ilya Semenov

Ilya Semenov

  • 4,610 Points 4k badge 2x thumb

Posted 1 year ago

  • 0
  • 1
Photo of Umut Aydin

Umut Aydin, Escalation Support Engineer

  • 2,280 Points 2k badge 2x thumb
Ilya,

roaming is seamless so you don't need enable special for this.

Regards

Umut
Photo of Umut Aydin

Umut Aydin, Escalation Support Engineer

  • 2,280 Points 2k badge 2x thumb
If you have more pair ( but you have only one controller so it's not needed)
then you need enable mobilty .

This can be done in the menu
Controller->Services->Mobility Manager
Photo of Pala, Zdenek

Pala, Zdenek, Employee

  • 9,180 Points 5k badge 2x thumb
For PSK you need to design right coverage. The client should have a AP to what can roam. If there are too many APs it is bad. If there is no AP to roam it is bad.
(Edited)
Photo of Ilya Semenov

Ilya Semenov

  • 4,610 Points 4k badge 2x thumb
Thanks, gentlemen!