cancel
Showing results for 
Search instead for 
Did you mean: 

How can we report on which users are connected to which APs in IdentiFi V10?

How can we report on which users are connected to which APs in IdentiFi V10?

Patrick_Timms
New Contributor II
We are a high school with a V2110 IdentiFi controller appliance and I have recently updated from V9 to V10 firmware. We have two SSIDs - one for internal users with WPA2 security, another for BYOD users with RADIUS security.

We used to be able to report on "Clients by VNS". This was very useful because we could find out where students were by checking which access point their device (almost all of them have one) was associated to on the BYOD SSID. Now, the single "Clients" report doesn't allow us to filter by which VNS, and also doesn't seem to show the username (the column is always blank on that SSID).

Is there any way around this?
8 REPLIES 8

Ronald_Dvorak
Honored Contributor
Great, let's see whether everything is working after they clients get reconnected.

Patrick_Timms
New Contributor II
Thanks - that seems to have helped, clients with usernames and IPs are beginning to filter in (guessing we need to wait for individual client devices to try again).

For info, these are students so they use their existing AD account to log in, which goes via our web filter - SmoothWall - which talks to AD itself.

Ronald_Dvorak
Honored Contributor
Wild guess - replace the shared secret on the controller and RADIUS and don't use special characters.

I'd like to unterstand the process in case there is a new guest at the site.
Is someone creating the AD account for every new guest or how does the guest get's the username/password.

Patrick_Timms
New Contributor II
I'm now getting reports that people can't associate to the BYOD SSID - and indeed, nor can I. This is since the upgrade and no VNS/RADIUS settings have been changed.

This is our RADIUS setup:

6f894b9032f542119761f01d6927abe1_RackMultipart20170109-73511-1ifjamd-RADIUS_inline.png


GTM-P2G8KFN