How I can check port-up-down trap settings in Summit Ver2 Stack ?

  • 0
  • 1
  • Question
  • Updated 2 years ago
  • Answered
How I can check  port-up-down trap settings in Summit Ver 2Stack with ExtremeXOS (Stack) version 16.1.2.14 16.1.2.14 ? 
Photo of Weda

Weda

  • 994 Points 500 badge 2x thumb

Posted 2 years ago

  • 0
  • 1
Photo of Prashanth KG

Prashanth KG, Employee

  • 5,300 Points 5k badge 2x thumb
Hi Weda,

Have you tried the following command, 

"show port <port number> info detail" 

You can look for the setting in the output as below: 

Link up/down SNMP trap filter setting:  Enabled 

Also, you can verify the configuration by filtering them using the following usage: 

"show configuration detail | include port-up-down"

Hope this helps! 
Let us know if you are looking for any other command. 
Photo of Henrique

Henrique, Employee

  • 10,302 Points 10k badge 2x thumb
Just an addition:

You can enable/disable port-up-down SNMP trap using the following command:

[enable | disable] snmp traps port-up-down ports [all | <portlist>]