How internet services can work in VLANs if there are 4VLANs on X440x Switch.

  • 0
  • 1
  • Question
  • Updated 3 years ago
  • Answered
Greetings!

Dear Friends,

We created 4 VLANs in X440x switch on which default VLAN1 is getting Internet service while other 3 VLANs are not having internet service.

We can provide further information if you need.

Thank You!

Best Regards
Photo of MikroTik

MikroTik

  • 80 Points 75 badge 2x thumb

Posted 3 years ago

  • 0
  • 1
Photo of Jeremy

Jeremy, Embassador

  • 9,788 Points 5k badge 2x thumb
enable ipforwarding
then
enable ipforwarding VlanName
Maybe?
Photo of Grosjean, Stephane

Grosjean, Stephane, Employee

  • 13,566 Points 10k badge 2x thumb
enable ipforwarding would enable it for every existing VLAN (for IPv4), no need to specify it for every vlan afterward, unless you create a new VLAN.

You need to have an IP address on each VLAN, that would be the gateway for your users. Pay attention to the limited L3 scale (ARP, routes) of the x440.
Photo of David Coglianese

David Coglianese, Embassador

  • 7,208 Points 5k badge 2x thumb
That would be my guess
Photo of Jan Steinbach

Jan Steinbach

  • 1,192 Points 1k badge 2x thumb
Do you want to use an DHCP service on the Internet Router as well? If yes you should also get familiar with the EXOS command regarding bootp relay.

http://documentation.extremenetworks....
In all cases you will need the already mentioned interVLAN Routing:

https://gtacknowledge.extremenetworks...

Cheers,
Jan
Photo of Patrick Voss

Patrick Voss, Alum

  • 11,594 Points 10k badge 2x thumb
Once you apply an IP address and turn on ip forwarding you will need a default route configured as well:

https://gtacknowledge.extremenetworks.com/articles/How_To/Configure-a-default-route-in-EXOS
Photo of Brandon Clay

Brandon Clay, Escalation Support Engineer

  • 13,486 Points 10k badge 2x thumb
You will likely need routes back to be added on the firewall as well.