cancel
Showing results for 
Search instead for 
Did you mean: 

How Often does EWC poll for AP graphs

How Often does EWC poll for AP graphs

Joshua_Puusep
New Contributor III
Hello,

I'm looking at a DCS event within netsight that lasted ~5 minutes.:

ad8d7e3b18934b08a17722205036b68c_RackMultipart20170928-114059-thhvq5-WirelessEvents_inline.png



But when i look at the AP on the controller, the graphs do not show and spikes in Noise level:

ad8d7e3b18934b08a17722205036b68c_RackMultipart20170928-125257-8mxz9z-AP_inline.png



These contradict each other, so i'm wondering if anyone can tell me how often EWC polls for that graphical data and weather it's possible that events 5 minutes and shorter are not being represented. Thanks much.

4 REPLIES 4

Bin
Extreme Employee
Hi,

These are the steps below to configure the polling timeout values on EMC:

1. Click Administration on GUI
2. Click Options and find out Status Polling tab
3. Configure Polling time

or

1. Start NetSight Console
2. Click Tools > Options > Suite Options > Status Polling
3. Configure Polling time

Best regards,

Joshua_Puusep
New Contributor III
Thanks Bin. Is it possible to modify the polling time for EWC rather than EMC? I rather reduce the polling time on EWC to 5 minutes than increase the polling time on EMC to 10 minutes.

Jacob__Praveen
Extreme Employee
The Netsight and EWC polling intervals are different. That's why you see contradictory results on the AP reports.

Nathiya_Munuswa
Extreme Employee
Hi Joshua,

EWC polls graphical data every 10-minute interval.

Snipped from User guide.

bac8108b89a14baeb1221a4917029207_RackMultipart20170929-20518-dkslcu-Capture_inline.jpg



GTM-P2G8KFN