cancel
Showing results for 
Search instead for 
Did you mean: 

How to adopt AP 7502 to wing controller vx9000

How to adopt AP 7502 to wing controller vx9000

Niyas
New Contributor III
Hi, we have Extreme AP 7502 and Wing controller vx9000,we need to adopt AP 7502 to controller vx9000.
5 REPLIES 5

Niyas
New Contributor III
Hi,

we are using standalone Access points

RobertZ
Extreme Employee

Max_McGrath
New Contributor III
Hi Niyas -

I run this setup in my environment; two VX9000s (Primary and Seconday) and 600+ 7502s. We do the following:
  • Use DHCP reservations for the APs to pull an IP address
  • Use DHCP option 191 for the APs to discover the contoller (see section 2.8 of http://www.michaelfmcnamara.com/files/motorola/WiNG_5X_How_To_NOC.pdf)
  • Create an AP7502 profile in WiNG. Configure the Controller Hostnames option under the Adoption page.
  • Create an Auto-Provisioning Policy to have the AP7502s automatically pull the proper profile to self-configure.
Hope this helps.

Max

Hi Niyas,

Good day to you,

Doesn't matter whether it is standalone access point, if you want to adopt AP7502 to VX9000 controller, you can follow the steps suggested by Max.

Thank you
GTM-P2G8KFN