How to block client use Wing 5.8

  • 0
  • 1
  • Question
  • Updated 9 months ago
  • Answered
Hi Everybody

I'm using AP7161 with FW WIng 5.8. How to block 1 client in the network?

Thanks you

Photo of Tuan Nguyen

Tuan Nguyen

  • 678 Points 500 badge 2x thumb

Posted 11 months ago

  • 0
  • 1
Photo of Shay Weir

Shay Weir

  • 1,648 Points 1k badge 2x thumb
Create an association ACL and apply to SSID...
association-acl-policy CLIENT-BLACKLIST
deny xx-xx-xx-xx-xx-xx xx-xx-xx-xx-xx-xx precedence 1
permit 00-00-00-00-00-00 FF-FF-FF-FF-FF-FF precedence 1000
Photo of Bin

Bin, Employee

  • 5,350 Points 5k badge 2x thumb
Hi, 

You could configure MAC Firewall Rules to block the client.

1. Select Configuration > Security > Wireless Firewall > MAC Firewall Rules
2. Add new Row to create MAC firewall Rule to Deny the traffic



3. Apply the rule on WLAN

Best regards,
Photo of Tuan Nguyen

Tuan Nguyen

  • 678 Points 500 badge 2x thumb
Hi you,

Thank for help, but is there a way to quickly copy the MAC address you want to block? The WING interface uses Adobe Flash so it can not be copied
Photo of Shay Weir

Shay Weir

  • 1,648 Points 1k badge 2x thumb
Use he CLI...
Photo of Tuan Nguyen

Tuan Nguyen

  • 678 Points 500 badge 2x thumb
Thanks Say Weir, but  I'm pretty poor at using CLI, I often use more interfaces.
Photo of Shay Weir

Shay Weir

  • 1,648 Points 1k badge 2x thumb
In the GUI...
Configuration Tab
Wireless tab
Association ACL - Create one to deny the MAC.  Be sure to do a permit at the end for all others (permit 00-00-00-00-00-00 FF-FF-FF-FF-FF-FF precedence 1000)

Once created...
WLAN Tab
select the SSID to apply ACL to
Expand the list of options for the WLAN
Select Firewall
then look for association ACL and enter the name of the ACL you created above to deny the MAC.  Apply and save.

How to do via GUI.....
I prefer to use the CLI as it is much quicker.  Download the Command reference guide for WiNG.  All CLI commands are there.  Very easy to use.  
Good luck.
Photo of Tuan Nguyen

Tuan Nguyen

  • 678 Points 500 badge 2x thumb
Hi you

I created MAC firewall rules but client still connection.  I try created IP Firewall rules but still not successful. Can you help me
Thank you


(Edited)