How to change ip address in extreme switch

  • 0
  • 2
  • Question
  • Updated 3 years ago
  • Answered
Photo of @ke

@ke

  • 162 Points 100 badge 2x thumb

Posted 3 years ago

  • 0
  • 2
Photo of André Herkenrath

André Herkenrath, Employee

  • 1,962 Points 1k badge 2x thumb
When your switch is factory default, it has no IP Address (unless you have a quite new release and the IP via DHCP)

Best practice is not to use the vlan default but to create a new one.

Here we go:

configure vlan default delete ports all
create vlan data tag 100
configure vlan data add ports all
configure vlan data ipadress 192.168.0.1/24

That's it
(Edited)
Photo of @ke

@ke

  • 162 Points 100 badge 2x thumb
Now I'm Chang ip address.  " unconfigure vlan "Default" ipaddress "  next,  Configure vlan "Default" ipaddress xx.xx.xx.xx/xx.   I'm want to chang ip address. Do not delete IP Address.  
Photo of M.Nees

M.Nees, Embassador

  • 9,958 Points 5k badge 2x thumb
The ip change is only possible via a delete and a assign new one. If you have only a network connection to this switch - do it with a script.
Photo of M.Nees

M.Nees, Embassador

  • 9,958 Points 5k badge 2x thumb
Hi @ke,
i found a script how to change the switching ip automatically:

enable cli scripting
unconfigure "Default" ipaddress
configure "Default" ipaddress 10.1.1.200/24

# write script and via tftp to the switch
#
# or local via "edit script change-ip.xsf" (vi-like)
# ls
# X430-8p.14 # load script change-ip.xsf
# * X430-8p.15 #
Regards