How to change port alias / display-string in OneView

  • 0
  • 1
  • Question
  • Updated 11 months ago
  • Answered
I have a client that wants to change the alias / display-string for a sinble port from OneView. He was used to Console and is asking me how to change this.

I have been trying, but with no luck. So I ask for help.

Thanks.
Photo of Jordi Soler

Jordi Soler

  • 626 Points 500 badge 2x thumb

Posted 11 months ago

  • 0
  • 1
Photo of Karthik Mohandoss

Karthik Mohandoss, Employee

  • 5,524 Points 5k badge 2x thumb
Photo of Jordi Soler

Jordi Soler

  • 626 Points 500 badge 2x thumb
Thanks for that!!!

I have been looking for that article for hours.

Just a pitty we can not use the same interface to change VLAN's on a port, speed, duplex ......
Photo of Jordi Soler

Jordi Soler

  • 626 Points 500 badge 2x thumb
Hi.

I was just doing some testing, and I realize that I can apply the change, but the switch (CLI) shows a configuration modification is pending to save. So the question is: When I do this change, I need to go to the switch afterwards and save the config?
Photo of Bin

Bin, Employee

  • 5,350 Points 5k badge 2x thumb
Hi Jordi

You try to create one script on OneView and send it to the switch to change the configuration of switch. 

There is one article which you reference for creating the script on OneView
https://gtacknowledge.extremenetworks.com/articles/How_To/How-to-create-a-basic-Extreme-Control-Cent...

Best regards