How to change statistic sample intervals?

  • 0
  • 1
  • Question
  • Updated 2 years ago
  • Answered
Hi community,

I am collecting port statistics on Summit 48si, but values are set to zero at end of sample interval according to MIB description, see example below:
- OID:  extremeRtStatsUndersizePkts
- OID Description: The number of packets received during the last sampling interval that were less than 64 octets.

My questions are related to sample interval mention above:
- What is default value of Sample Interval?
- Is there any way to change Sample Interval value?

Thanks in advance for all collaboration,
Wanderley Benacchio Junior
Photo of Wanderley Benacchio

Wanderley Benacchio

  • 150 Points 100 badge 2x thumb

Posted 2 years ago

  • 0
  • 1
Photo of Taykin Izzet

Taykin Izzet , Employee

  • 3,106 Points 3k badge 2x thumb
Wanderley, per the extremeRtStatsIndex, the description states "The last sample of Ethernet statistics on a particular Ethernet interface.  This sample is associated with the RMON  historyControlEntry which set up the parameters for a regular collection of these samples".

Please review the MIB in use for any RMON OIDs and see if there are any options there.