cancel
Showing results for 
Search instead for 
Did you mean: 

how to configure default route in controller C25

how to configure default route in controller C25

Ashish_Sahu
New Contributor

d4b0f0ccec9b48b18c5c81fe3531681a_RackMultipart20151228-23444-juue13-error_inline.jpg

3 REPLIES 3

Doug
Extreme Employee
Reference: https://gtacknowledge.extremenetworks.com/articles/How_To/How-to-configure-the-default-route-on-the-...

Doug Hyde
Director, Technical Support / Extreme Networks

Zdeněk_Pala
Extreme Employee
Differrent way to do it for admin topology and differrent for physical topology. ip Route add 0.0.0.0 0.0.0.0 1.1.1.1 Apply The above should be for physical. The admin should be through; Topology Admin L3 ... Apply End Apply End ...
Regards Zdeněk Pala

Ronald_Dvorak
Honored Contributor
From the controller GUI > Controller > Network > Routing Protocols > new

For a default route set "Destination Address" and "Subnet Mask" to 0.0.0.0 and put 172.129.20.1 in the "Gateway" field.

-Ron
GTM-P2G8KFN