How to configure DynDNS in WiNG controller

  • 0
  • 1
  • Question
  • Updated 3 weeks ago
  • Answered
Please share configuration details or templates for integrating DynDNS in WiNG controller version 5.9
Photo of Jimmyb


  • 70 Points

Posted 3 weeks ago

  • 0
  • 1
Photo of Ondrej Lepa

Ondrej Lepa, Employee

  • 6,100 Points 5k badge 2x thumb
Hi Jimmy,

You can take parts from WiNG default configuration as follows:
interface pppoe1
  description PPPoE Client interface
  auth-type pap
  idle-time 600
  no keepalive
  no username
  no password
  no service-name
  local-net vlan 1
  mtu 1492
  no ip address
  no crypto map
  no ip nat
  no use ip-access-list in
  ip default-gateway priority 2000
It is going to be as easy as mapping values you have on other side.

In case of DDNS you may follow similar guidance, provided within CLI reference guide
Search for ddns (dhcpv4-pool-config) on page 1438
ddns domainname <DDNS-DOMAIN-NAME>
ddns multiple-user-class
ddns server [<IP>|<HOST-ALIAS-NAME>] {<IP1>|<HOST-ALIAS-NAME1>}
ddns ttl <1-864000>
All available documentation can be found on Extreme Networks portal