cancel
Showing results for 
Search instead for 
Did you mean: 

How to configure EAPS primary or secondary port, if this port belong to a LAG?

How to configure EAPS primary or secondary port, if this port belong to a LAG?

Edison
New Contributor II
Hi, I'm doing a test lab, and I want to make a LAG to participate ein a EAPS domain and I noticed that you can put many ports as primary or secondary, so I was wondering if I have to put all the ports that belong to the LAG or I only put the master port,In case its only necessary to put the master port what is the purpose of the command to put a list port. Thanks in advance.
5 REPLIES 5

Edison
New Contributor II
Thank you Erik and Bill, I will test it in a lab next week.

StephenW
Extreme Employee
Dennis, Let us know how the lab goes.

Thanks for joining the Hub Dennis.
As you can see, answers flow fast in our Community. Give a little and you get a lot in return!

Bill_Stritzinge
Extreme Employee
You only have to put the master port into either the primary of secondary ports. Not sure about the list as you call it as you can only have one master and one secondary port.
GTM-P2G8KFN