How to configure LLDP for Mitel and Cisco phones on an Extreme X-series switch (X440, X460, etc.)

  • 0
  • 2
  • Article
  • Updated 3 years ago
create qosprofile "QP6"
enable diffserv examination port <port Range>
enable dot1p replacement port <port Range>
configure qosprofile QP6 maxbuffer 100 weight 1
configure qosprofile QP6 minbw 0 maxbw 100 ports <port Range>
configure diffserv examination code-point 46 qosprofile QP6
configure lldp port all advertise system-name
configure lldp port all advertise vendor-specific dot3 mac-phy
configure lldp port all advertise vendor-specific med capabilities
configure lldp port all advertise vendor-specific med power-via-mdi
configure lldp port all advertise vendor-specific med policy application voice vlan <Vlan name> dscp 46
Photo of Joseph Burnsworth

Joseph Burnsworth

  • 2,328 Points 2k badge 2x thumb

Posted 3 years ago

  • 0
  • 2

Be the first to post a reply!