cancel
Showing results for 
Search instead for 
Did you mean: 

How to Configure Local MAC address based Authentication in WM3600 Cluster?

How to Configure Local MAC address based Authentication in WM3600 Cluster?

Jitendra_Patel
New Contributor
I have a Cluster of 02 WM3600 Controllers with SW version 5.4.

Need to implement MAC address based Local ( On Controller) authentication.

Requirement is for two type of users:

1. Employees

2. Guest

For Employee:

WLAN User should not be asked any password. Only a set of MAC IDs should be allowed to use the SSID. Users with other MAC IDs should not be allowed (restricted) to access the SSID.

For Guest:

WLAN User has to login a KEY/Password and get access. But SSID other than used for Employees.

Any one can guide on this?

Regards,

Jitendra

11 REPLIES 11

Jitendra_Patel
New Contributor
Hi Nathiya,

Herewith please find GTAC CASE ID: 01190608.

Regards,

Jitendra

Nathiya_Munuswa
Extreme Employee
Hi Jitendra,

Can you please open a TAC case and give me the case #, will work on it further.

https://gtacknowledge.extremenetworks.com/articles/How_To/How-to-contact-Extreme-Networks-Global-Tec...

Regards,
Nathiya M

Jitendra_Patel
New Contributor
and for SSID: NTPC-TRANG it is authenticating..connecting... and again disconnecting... and loop goes on.

Jitendra_Patel
New Contributor
Hi Nathiya,

User/device is neither connecting to the SSID nor getting IP Address.

Regards,

Jitendra

GTM-P2G8KFN