How to Configure QoS for video IP on Summit X430

  • 0
  • 1
  • Question
  • Updated 3 years ago
  • Answered
Hi everyone, I have a Summit X430-24p switch and I want your help for know configure QoS for IP video surveillance cameras on HD. The problem is the video shows pixels on the image quality and sometimes the video frozen. The video has a Vlan for this purpose. Do you have any idea to how configured this?


Thanks 
Photo of David Negrete

David Negrete

  • 166 Points 100 badge 2x thumb

Posted 3 years ago

  • 0
  • 1
Photo of EtherMAN

EtherMAN, Embassador

  • 6,456 Points 5k badge 2x thumb
Lots of how too's on QOS... Real question is will it help... Adding QOS on a switch that is not being taxed for a video stream when there may be a router involved or multiple feeds going into an undersized server/workstation.... so on and so on... Best advice I can give you is you to look at everything from encoder to decoder to figure out why you are dropping a video feed... If you could give us a bit more info several in the group have video services we provide and may be able to help much more than just applying a QOS .... (stepping off soapbox) :) 
Photo of David Negrete

David Negrete

  • 166 Points 100 badge 2x thumb
Thanks EterhMan, I appreciate your information. Try to gather more information about it to share with you and find a solution to this problem.

Cheers
Photo of Andrew Maldonado

Andrew Maldonado, Extreme Alumnus

  • 2,302 Points 2k badge 2x thumb
(Edited)