how to configure ssh on extreme X450e-48t

  • 0
  • 1
  • Problem
  • Updated 10 months ago
  • Solved
please help me to configure ssh over my network, I have the following switch with the following details :


* AMM-GF-SW05.1 # sh version
Switch      : 800391-00-01 1201G-81983 Rev 1.0 BootROM: 1.0.5.6    IMG: 12.5.1.6
XGM2-1      : N/A          N/A         Rev 0.0

Image   : ExtremeXOS version 12.5.1.6 v1251b6 by release-manager
          on Tue Nov 23 09:49:14 PST 2010
BootROM : 1.0.5.6
* AMM-GF-SW05.2 # sh switch

SysName:          AMM-GF-SW05
SysLocation:
SysContact:       support@extremenetworks.com, +1 888 257 3000
System MAC:       00:04:96:52:FB:75
System Type:      X450e-48t

SysHealth check:  Enabled (Normal)
Recovery Mode:    All
System Watchdog:  Enabled

Current Time:     Wed Dec 13 12:58:53 2017
Timezone:         [Auto DST Disabled] GMT Offset: 0 minutes, name is UTC.
Boot Time:        Sun Apr  9 23:12:16 2017
Boot Count:       36
Next Reboot:      None scheduled
System UpTime:    247 days 13 hours 46 minutes 37 seconds

Current State:    OPERATIONAL
Image Selected:   primary
Image Booted:     primary
Primary ver:      12.5.1.6
Secondary ver:    12.5.1.6

Config Selected:  primary.cfg
Config Booted:    primary.cfg

primary.cfg       Created by ExtremeXOS version 12.5.1.6
                  201155 bytes saved on Tue Dec 12 08:52:56 2017
Photo of Mohammad Alshaweesh

Mohammad Alshaweesh

  • 130 Points 100 badge 2x thumb

Posted 10 months ago

  • 0
  • 1
Photo of Darren Saliva

Darren Saliva

  • 662 Points 500 badge 2x thumb
You need to install the SSH mod for that firmware version. I believe you need an active support contract on it to be able to log into the extreme support portal and download the mod.
Photo of Ronald Dvorak

Ronald Dvorak, Embassador

  • 50,124 Points 50k badge 2x thumb
Photo of Mohammad Alshaweesh

Mohammad Alshaweesh

  • 130 Points 100 badge 2x thumb
can you give me the link for install the SSH mode