how to configure trunk and access port in enterasys switches please help here

  • 0
  • 1
  • Question
  • Updated 1 year ago
  • Answered
how do i configure a port as trunk and access port in enterasys switch
Photo of Farookh shaikh

Farookh shaikh

  • 282 Points 250 badge 2x thumb

Posted 2 years ago

  • 0
  • 1
Photo of Ronald Dvorak

Ronald Dvorak, Embassador

  • 45,286 Points 20k badge 2x thumb
Please provide the model as there are differences in the CLI commands.

-Ron
Photo of Farookh shaikh

Farookh shaikh

  • 282 Points 250 badge 2x thumb
Hi Ronald,

The enterasys switch model is enterasys c5g124-24 please help

Thanks,
Farookh
Photo of Ronald Dvorak

Ronald Dvorak, Embassador

  • 45,286 Points 20k badge 2x thumb
How to set a untagged VLAN...
# set port vlan ge.1.15 100 modify-egress

How to set a tagged VLAN...
# set vlan egress 200 ge.1.15 tagged

-Ron
Photo of Farookh shaikh

Farookh shaikh

  • 282 Points 250 badge 2x thumb
Hi ron,

Thanks for help it works superb

Farookh
Photo of Atux Atux

Atux Atux

  • 170 Points 100 badge 2x thumb
i have model 08H20G4-24P and the aforementioned commands do not show up in my switch. the set command is not recognized. So how can i create 2 vlans eg vlan 2 with ports 1-5 and vlan 3 with ports 6-9. port 10 be the trunk port.
(Edited)