how to configure wm3700 snmp trap to Zabbix?

  • 0
  • 2
  • Question
  • Updated 4 years ago
  • Answered
How to know the number of connected points and their status via snmp?
Photo of Marckson Silva

Marckson Silva

  • 130 Points 100 badge 2x thumb

Posted 4 years ago

  • 0
  • 2
Photo of Colatuno, Joe

Colatuno, Joe, Escalation Support Engineer

  • 1,096 Points 1k badge 2x thumb
Hey Marckson,

Are you just looking to add the APs to the snmp manager?  All snmp settings can be set in the management policy.  There you can add your communities if snmp v1/2 or users for snmpv3.
Photo of Marckson Silva

Marckson Silva

  • 130 Points 100 badge 2x thumb
already configured snmp management policy in wm3700. A zabbix server has configured based on the tutorial below, but do not return total number of clients OID value: .1.3.6.1.4.1.1916.2.131.50.1.4.2.25.10.1.1.22  or number of wireless users .1.3.6.1.4.1.1916.2.131.1.1.8.1.19.0.   
LINK: https://www.zabbix.com/documentation/2.0/manual/config/items/itemtypes/snmptrap

trap configuration file: /etc/snmp$ cat snmptt.conf 

EVENT general .* "General event" NormalFORMAT ZBXTRAP $aA $ar
SDESC
Permite zabbix capturar traps de qualquer OID que tiver chave snmptrap General event.
EDESC