How to disable ntp in ExtremeXOS.

  • 0
  • 1
  • Question
  • Updated 3 years ago
  • Answered
how to disable ntp in ExtremeXOS?
I tried some commands as "disable ntp" but many times it through this error: %% Invalid input detected at '^' marker.
Help me, please.
Thanks.
Photo of Taner Yamak

Taner Yamak

  • 160 Points 100 badge 2x thumb

Posted 3 years ago

  • 0
  • 1
Photo of Ronald Dvorak

Ronald Dvorak, Embassador

  • 45,132 Points 20k badge 2x thumb
command refernce guide...

configure ntp [server | peer] delete [ip_address | host_name]
Photo of Taner Yamak

Taner Yamak

  • 160 Points 100 badge 2x thumb
Hi, 
I tried as "configure ntp server delete XX.XXX.XXX.XX" it throwed same error.
"%% Invalid input detected at '^' marker."
Photo of Ronald Dvorak

Ronald Dvorak, Embassador

  • 45,132 Points 20k badge 2x thumb
Could you please post the output for "show configuration ntp"

Thx
Photo of Taner Yamak

Taner Yamak

  • 160 Points 100 badge 2x thumb
Unfortunately same error :(

# show configuration ntp                                       ^
%% Invalid input detected at '^' marker.
Photo of Zelnosky, Kevin

Zelnosky, Kevin, Employee

  • 1,124 Points 1k badge 2x thumb
Taner,

What model switch and version of EXOS is this?
Photo of Taner Yamak

Taner Yamak

  • 160 Points 100 badge 2x thumb
Hi Kevin,

Switch      : 800302-00-01 1213G-81070 Rev 1.0 BootROM: 1.0.3.5    IMG: 12.6.2.10 XGM2-1      :
Image   : ExtremeXOS version 12.6.2.10 v1262b10 by release-manager
          on Thu Sep 29 18:17:34 EDT 2011
BootROM : 1.0.3.5
Photo of Andrew Maldonado

Andrew Maldonado, Extreme Alumnus

  • 2,302 Points 2k badge 2x thumb
Taner,

images older than 15.5 require the NTP xmod in order to obtain the NTP feature. Is the NTP xmod installed on the Summit X450a in question? The "show version images" can be used to confirm the install images.


-Andrew
Photo of Paul

Paul

  • 2,026 Points 2k badge 2x thumb
Taner,

Please update the following output.

sh version image
sh process ntp


You need to disable SNTP in order to work NTP. 
SNTP and NTP cannot run together.

Need to Install NTP module to switch for 15.x.x.x
install image "summitX-15.3.3.5-patch1-6-ntp.xmod"
run update


-Paul

FYI. Thanks.
https://community.extremenetworks.com/extreme/topics/can-the-bd8810-be-used-as-a-ntp-server
(Edited)
Photo of Taner Yamak

Taner Yamak

  • 160 Points 100 badge 2x thumb
Hello Andrew,

This is images version:
 
Card  Partition     Installation Date        Version     Name      Branch------------------------------------------------------------------------------
Switch primary   Mon Nov 5 13:27:25 UTC 2012 12.6.2.10 summitX-12.6.2.10.xos v1262b10
Switch primary   Mon Nov 5 13:45:43 UTC 2012 12.6.2.10 summitX-12.6.2.10-ssh.xmod v1262b10
Switch secondary Mon Nov 5 13:18:14 UTC 2012 12.6.2.10 summitX-12.6.2.10.xos v1262b10
Switch secondary Mon Nov 5 13:44:42 UTC 2012 12.6.2.10 summitX-12.6.2.10-ssh.xmod v1262b10
Photo of Taner Yamak

Taner Yamak

  • 160 Points 100 badge 2x thumb
Hi Paul,

When I write "sh process ntp"  command I get same error again.
                              ^
%% Invalid input detected at '^' marker.
---------------------------------------------------------------------------------
How to disable ntp after install image?
Photo of Drew C.

Drew C., Community Manager

  • 37,350 Points 20k badge 2x thumb
Hi Taner,
NTP wasn't available until EXOS 12.7 and required a separate XMOD until EXOS 15.5.  Since your switch is on 12.6, NTP isn't available.
Photo of Taner Yamak

Taner Yamak

  • 160 Points 100 badge 2x thumb
Hi Drew,

Thank you. Then I need to upgrade to EXOS 15.5.
This commands are enough?
install image "summitX-15.3.3.5-patch1-6-ntp.xmod"
run update
Photo of Andrew Maldonado

Andrew Maldonado, Extreme Alumnus

  • 2,302 Points 2k badge 2x thumb
Taner,

If you are upgrading to EXOS 15.5 the NTP can be configured without the "run update" command or a separate ntp.xmod image.

If you are upgrading to EXOS 15.3 the commands mentioned are correct.

-Andrew
Photo of Taner Yamak

Taner Yamak

  • 160 Points 100 badge 2x thumb
Hi Drew,

My aim is disabling ntp due to working for is leap section. If my system is EXOS 12.6 hasn't ntp so I do not need to disable ntp, isn't it? 
Photo of Andrew Maldonado

Andrew Maldonado, Extreme Alumnus

  • 2,302 Points 2k badge 2x thumb
Taner,

Correct; as NTP is not an available feature in EXOS 12.6 there is no need to disable NTP.

-Andrew
Photo of Chad Smith

Chad Smith, Senior Escalation Support Engineer

  • 5,620 Points 5k badge 2x thumb