cancel
Showing results for 
Search instead for 
Did you mean: 

How to enable MPLS on ExOS VM ?

How to enable MPLS on ExOS VM ?

Oscar_Belmar_Ma
New Contributor
That ́s all...

MPLS is supported by ExOS VM ???

# sh verSwitch : PN:1N2039 SN:123456 Rev 0.1 BootROM: 1.2 IMG: 15.3.2.11
PSUCTRL-1 : PN:MEAD SN:MD1 Rev 0.1 BootROM: 2.1
PSUCTRL-2 : PN:MEAD SN:MD2 Rev 1.1 BootROM: 2.3
mouse-usb : PN:MOUSE SN:4321 Rev 1.1 BootROM: 4.3
floppy-A :
PSU-1 : Stack PS Slot # 2 PN:1N2039 SN:1234 Rev 0.1
PSU-2 : Stack PS Slot # 3 PN:1N2039 SN:1234 Rev 0.1

Image : ExtremeXOS version 15.3.2.11 v1532b11 by release-manager
on Tue Jun 18 15:25:24 EDT 2013
BootROM : 1.2
10 REPLIES 10

Darren_Saliva
New Contributor
Thanks Stephane. So I created the vm from the iso image and powered it on and it booted successfully. I then followed the install guide to add more nics, but now when I power on the vm it does not boot. I keep getting a watchdog warning message that has seconds that count up each time the error message appears.

Drew_C
Valued Contributor III
<content-quote data-username="Darren Saliva">Thanks Stephane. So I created the vm from the iso image and powered it on and it booted successfully. I then followed the install guide to add more nics, but now when I power on the vm it does not boot. I keep getting a watchdog warning message that has seconds that count up each time the error message appears.</content-quote>Let's track this in a separate thread. Please reference the new conversation here: EXOS-VM doesn't boot after adding more NICs

Stephane_Grosj1
Extreme Employee
There: https://github.com/extremenetworks/Virtual_EXOS

16.1.3 is already on it.

Darren_Saliva
New Contributor
Great thanks Stephane. The VM I'm using is the one I downloaded from the ekit site? where do i find a more up-to-date version of the VM?
GTM-P2G8KFN