How to set time in switch 450series

  • 0
  • 1
  • Question
  • Updated 4 weeks ago
I would to "set time" of my switch 450 series ...in series B5 extreme I have success but not in 450 series

Photo of Visconti

Visconti

  • 524 Points 500 badge 2x thumb

Posted 1 month ago

  • 0
  • 1
Photo of Alexandr P

Alexandr P, Embassador

  • 12,596 Points 10k badge 2x thumb
Hi!

Which exactly X450?
X450 with ExtremeWare or X450a/e with EXOS?

Thank you!
Photo of Visconti

Visconti

  • 524 Points 500 badge 2x thumb
x450-g2-48p-10ge4
I try to set time with terminal of extreme management center
Photo of Alexandr P

Alexandr P, Embassador

  • 12,596 Points 10k badge 2x thumb
configure time month day year hour min sec
configure timezone ...

Thank you!
Photo of Visconti

Visconti

  • 524 Points 500 badge 2x thumb
ok thanks ...I'm not very practical in this world (extreme managment...switching...putty...ecc..) can you say me how i can find any extreme manual of terminal webshell?
Photo of Alexandr P

Alexandr P, Embassador

  • 12,546 Points 10k badge 2x thumb
https://www.extremenetworks.com/support/documentation/extremexos-software-22-5/

You can choose EXOS version.
2 main manuals - User Guide and Command Reference Guide.

Thank you!
Photo of Visconti

Visconti

  • 524 Points 500 badge 2x thumb
oK thank ...and the same manual of B5G124 ?

Photo of Tomasz

Tomasz

  • 816 Points 500 badge 2x thumb
Nope, B5 is ex-Enterasys platform that runs EOS firmware instead of EXOS. You can get the relevant guides here: https://www.extremenetworks.com/support/documentation/a-b-c-series-6-81-xx/


Photo of Eric Burke

Eric Burke

  • 3,168 Points 3k badge 2x thumb
Here's our standard EXOS time config (must set DNS if using hostname for SNTP server). Also, if you have a firewall that's providing GeoIP filtering, keep the time servers limited to the geographies you trust. In my example, we're only using US-based time sources:

config timezone name EST -300 autodst

config dns-client add name-server 8.8.8.8 vr VR-Default

config dns-client add name-server 8.8.4.4 vr VR-Default

config sntp-client primary us.pool.ntp.org vr VR-Default

enable sntp-client