cancel
Showing results for 
Search instead for 
Did you mean: 

How to set time in switch 450series

How to set time in switch 450series

Visconti
New Contributor III
I would to "set time" of my switch 450 series ...in series B5 extreme I have success but not in 450 series

8 REPLIES 8

Eric_Burke
New Contributor III
Here's our standard EXOS time config (must set DNS if using hostname for SNTP server). Also, if you have a firewall that's providing GeoIP filtering, keep the time servers limited to the geographies you trust. In my example, we're only using US-based time sources:

config timezone name EST -300 autodst
config dns-client add name-server 8.8.8.8 vr VR-Default

config dns-client add name-server 8.8.4.4 vr VR-Default

config sntp-client primary us.pool.ntp.org vr VR-Default

enable sntp-client

Visconti
New Contributor III
ok thanks ...I'm not very practical in this world (extreme managment...switching...putty...ecc..) can you say me how i can find any extreme manual of terminal webshell?

Tomasz
Valued Contributor II
Nope, B5 is ex-Enterasys platform that runs EOS firmware instead of EXOS. You can get the relevant guides here: https://www.extremenetworks.com/support/documentation/a-b-c-series-6-81-xx/

Visconti
New Contributor III
oK thank ...and the same manual of B5G124 ?

GTM-P2G8KFN