How do I copy a config file from a Summit x460 to usb flash?

  • 0
  • 2
  • Question
  • Updated 4 years ago
  • Answered
How do I copy a config file from a Summit x460 to usb flash? When I run a cp (copy) command it doesn't give an error (cp primary.cfg memorycard extremepri.cfg), but when I try to do an ls memorycard, it says the usb drive isn't mounted and when I put the usb drive in my computer there is nothing there.
Photo of Vince

Vince

  • 90 Points 75 badge 2x thumb
  • annoyed

Posted 4 years ago

  • 0
  • 2
Photo of Paul Russo

Paul Russo, Alum

  • 9,694 Points 5k badge 2x thumb
Official Response
Hello Vince

Try looking up this command "tftp"
"tftp [host-name | ip-address] {-v vr_name} [-g | -p] [{-l [internal-memory local-"
"file-internal | memorycard local-file-memcard | local-file} {-r remote-file} | {- r remote-file} {-l [internal-memory local-file-internal | memorycard local-file-"
"memcard | local-file]}]" in the EXOS_Command_reference_Guide _15_4 it should start in page 316.

There is a big writeup on using the USB slot.  The command reference guide can be downloaded from the main web site www.extremenetworks.com documentation.

Let me know if this helps or if you have any further questions

Thanks
P