How to Copy a SecureStack Configuration between DRAM and Flash

  • 0
  • 1
  • Article
  • Updated 4 years ago
  • (Edited)
Article ID: 5533 

SecureStack C3
SecureStack C2
SecureStack B3
SecureStack B2
SecureStack A2 

'show config outfile'

Copy a SecureStack Configuration between DRAM and Flash
Save configuration to Internal Directory
Restart using a new configuration
Copy a config 

To save a copy of the running configuration from DRAM to the internal File Directory (Flash) for archival purposes, write it to the 'configs' directory
  C2(rw)->show config outfile configs/myfile.cfg
Files: Size
================================ ========
myfile.cfg 7269
current.log 48401

To restart the system using this configuration, reference it in the 'configs' directory:
  C2(rw)->configure configs/myfile.cfg
This command will reset the system and clear current configuration.
Are you sure you want to continue (y/n) [n]?y
Copy OK: 7269 bytes copied

For more about these command sets, please refer to the SecureStack Configuration Guide for your product.
Photo of FAQ User

FAQ User, Official Rep

  • 13,590 Points 10k badge 2x thumb

Posted 4 years ago

  • 0
  • 1

There are no replies.

This conversation is no longer open for comments or replies.