how to find out port utilization report in redgeline 4.0

  • 0
  • 1
  • Question
  • Updated 4 years ago
Dear all,
                   We are using redgeline 4.0.. how to find out  port utilization in a switch
Photo of Mohammed Jasheer

Mohammed Jasheer

  • 916 Points 500 badge 2x thumb

Posted 4 years ago

  • 0
  • 1
Photo of Jason Parker

Jason Parker, Employee

  • 3,018 Points 3k badge 2x thumb
Please try the following

* Extreme-x150.1 # show port utilization ?
  <cr>            Execute the command
  bandwidth       Port utilization as percentage of bandwidth
  bytes           Port utilization in bytes/sec
  packets         Port utilization in packets/sec
* Extreme-x150.1 # show port utilization

Jason

Photo of Sumit Tokle

Sumit Tokle, Alum

  • 5,738 Points 5k badge 2x thumb
As per as I know, there is no way to see the port utilization through Ridgeline. Only through CLI you can monitor the port utilization. 
Photo of Mohammed Jasheer

Mohammed Jasheer

  • 916 Points 500 badge 2x thumb
Good morning Sumit Tokle.
                       Is it possible upgrade sp1.i think old version in this option working

(Edited)
Photo of Sumit Tokle

Sumit Tokle, Alum

  • 5,738 Points 5k badge 2x thumb
We have PD PD4-2873612432 in RL 4.0.

RT(Real time) Statistics feature is not available. Our engineering team is in process to resolve PD.
However, I don't have any ETA for solution.
Photo of Mohammed Jasheer

Mohammed Jasheer

  • 916 Points 500 badge 2x thumb
tq sumit