How To Manage SNMP credentials (Communities) and passwords in Enterasys NetSight

  • 1
  • 1
  • Article
  • Updated 5 years ago
Enterasys GTAC veteran Bob Maheu describes How To use NetSight to manage SNMP credentials (also known as community strings or passwords) on devices managed within Enterasys NetSight Management System

Photo of FAQ User

FAQ User, Official Rep

  • 13,620 Points 10k badge 2x thumb

Posted 5 years ago

  • 1
  • 1
We would like change the snmp credential in all our devices (250 devices), How can we do this with Enterasys Netsight?

Thanks a lot.
Photo of Doug Hyde

Doug Hyde, Technical Support Manager

  • 20,514 Points 20k badge 2x thumb
Hello,

This video can walk you through the process...

https://www.youtube.com/v/6SgPyMp98-c&...

You can set this change on multiple devices. It is very dangerous if you push out a misconfiguration. I would suggest you try this on one device first to make sure you set the snmp passwords properly. You can then push the changes to all 250 devices. If you have any further questions please feel free to contact the GTAC for assistance.

Regards,

Doug Hyde
Sr Support Engineer
Enterasys Networks
Thanks Doug. we'll try it carefully.

Regards
Now we have another question with this point, How can change the login credential (cli- admin/password) in all our devices? Is this possible with Netsight too?

Thanks a lot.
Photo of Tamera Rousseau-Vesta

Tamera Rousseau-Vesta, Extreme Alumna

  • 2,760 Points 2k badge 2x thumb
This is an additional question to the original post that everyone could benefit from. Please reference the new topic here: Is is possible to change login credentials for all SNMP devices with Netsight?

This conversation is no longer open for comments or replies.