cancel
Showing results for 
Search instead for 
Did you mean: 

Huge Boot Time on BD8800

Huge Boot Time on BD8800

Loic_Pasquiet
New Contributor
Hi everybody,

We have some problems about our new BD88K boot time 40 min

We have 29 policys (1000 ACLs) on production, however with the same configuration on our previous BD10K, the boot time lasted 5 min.

We have the same problem with these versions:
Primary ver: 16.1.2.14
Secondary ver: 15.7.2.9

During the boot, a show slot command display "ACL sync".

Furthermore, a show slot give:

Slots Type Configured State Ports Flags-------------------------------------------------------------------------------
Slot-1 8900-40G6X-xm 8900-40G6X-xm Operational 24 MB
Slot-2 8900-10G24X-c 8900-10G24X-c Operational 24 MB
Slot-3 8900-10G24X-c 8900-10G24X-c Operational 24 MB
Slot-4 Empty 0
Slot-5 Empty 0
Slot-6 Empty 0
Slot-7 G48Tc G48Tc Operational 48 MB
Slot-8 Empty 0
Slot-9 8900-G48X-xl 8900-G48X-xl Operational 48 MB
Slot-10 8900-G48X-xl 8900-G48X-xl Operational 48 MB
MSM-A 8900-MSM128 Operational 0
MSM-B 8900-MSM128 Operational 0

Do you have any information about this problem?

Best Regards,

Network Engineer

5 REPLIES 5

Loic_Pasquiet
New Contributor
Yes, we now understand better the functioning of the new hardware. I regret that your partner has missed it. This forced us to completely rewrite our policy!
We are thus 300 lines instead of thousands. Remain positive. After losing a week, the migration could resume.

Stephane_Grosj1
Extreme Employee
Missed that thread 🙂

for further reference, we improved the boot time down to 6mn or so creating a single .pol instead of multiple separated files, and applied as any. We suspected TCAM shifting happening, explaining the long boot time.

Some other optimization have been made in the rules, as well.

Drew_C
Valued Contributor III
Nice work! Thanks for coming back with an update 🙂

Chad_Smith1
Extreme Employee
Loic Pasquiet,

As Esa has stated, large policy files can increase the boot time of the 8800. Rules that have counters can also increase the boot time. Uninstalling and re-installing the ACLs is a potential workaround.

If you would like to open up a support case with the GTAC, we could investigate potential ways to improve the boot time on your BlackDiamond.
GTM-P2G8KFN