Hybrid QSFP28 Breakout

  • 0
  • 1
  • Question
  • Updated 11 months ago
  • Doesn't Need an Answer
Hi,

I know one 100Gbps QSFP28 can be splitted to 4 25Gbps SFP28 or 2 50Gbps QSFP28 using breakout cable. Is it possible to have both type splitting? What if one or more but not all of them should go to fiber, what item should I use for that?

Best regards,
Photo of Mrxlazuardin

Mrxlazuardin

  • 1,454 Points 1k badge 2x thumb

Posted 12 months ago

  • 0
  • 1
Photo of OscarK

OscarK, ESE

  • 7,702 Points 5k badge 2x thumb
No, not that I know of, you configure the whole port to a certain partitioning, so either 4x25 or 2x50 but you cannot partition to 2x25 + 1 x50.
Photo of Mrxlazuardin

Mrxlazuardin

  • 1,454 Points 1k badge 2x thumb
Hi Oscar,

Is it possible to have some DACs and some optics with same speed?

Best regards,
Photo of OscarK

OscarK, ESE

  • 7,702 Points 5k badge 2x thumb
I think there is no cable that splits 1 connector to partly passive copper and the other half to active copper.
Photo of Mrxlazuardin

Mrxlazuardin

  • 1,454 Points 1k badge 2x thumb
Hi Oscar,

Do you know SFP28 converter for converting SFP28 partition to 25Gbps optic?

Best regards,
Photo of OscarK

OscarK, ESE

  • 7,702 Points 5k badge 2x thumb
I think you need this MPO module.
10331 CFP2 100GBASE- SR10 100 Gigabit Ethernet-SR10 CPF2 optical module, MPO connector, 100m link length
Photo of Mrxlazuardin

Mrxlazuardin

  • 1,454 Points 1k badge 2x thumb
Hi Oscar,

How can I get some SFP28 optics and some SFP28 DAC with that module?

Best regards,
Photo of Grosjean, Stephane

Grosjean, Stephane, Employee

  • 12,492 Points 10k badge 2x thumb
If you plan to have out of a QSFP28 some 25Gbps lanes as regular fiber to plug into a transceiver (SFP28) and some as passive copper DAC, that doesn't exist (to my knowledge).

Either you plug a QSFP28 DAC/AOC that breakout into 4xSFP28 of the same type, or you use a QSFP28 transceiver (SR4 for example) and you use a breakout cable MPO-to-8xLC, to connect to other transceivers (SFP28).
Photo of Mrxlazuardin

Mrxlazuardin

  • 1,454 Points 1k badge 2x thumb
Hi Oscar,

It seem that what I'm looking is a kind of media converter but with SFP28 to SFP28 or at least SFP28 to SFP+. With that media converter, I can plug a partition of breakout cable on one port and plug a transceiver on other port. It is like https://www.omnitron-systems.com/iconverter-xg-10g-fiber-to-fiber-industrial-media-converter.php but this media converter is for SFP+/XFP. Any suggested one which match my requirement?

Best regards,