I need the drill/mounting template for a 3935i Access Point

  • 0
  • 1
  • Question
  • Updated 2 years ago
  • Answered
Photo of Randy Brown

Randy Brown

  • 110 Points 100 badge 2x thumb

Posted 2 years ago

  • 0
  • 1
Photo of Craig Guilmette

Craig Guilmette, Employee

  • 2,752 Points 2k badge 2x thumb
Photo of Ronald Dvorak

Ronald Dvorak, Embassador

  • 50,114 Points 50k badge 2x thumb
If I print that in A3 that would be a very BIG hole in the wall :-)
Photo of Craig Guilmette

Craig Guilmette, Employee

  • 2,752 Points 2k badge 2x thumb
It clearly shows 112.5 mm between screw hole centers or 4.43 inches. Sorry it was the best I could do with only a cell phone to work with. 
Photo of Ronald Dvorak

Ronald Dvorak, Embassador

  • 50,114 Points 50k badge 2x thumb
Sorry didn't get that as I didn't opened the pic in another browser window - I only thought .. how should that work without any reference to print it out :-)
Photo of Randy Brown

Randy Brown

  • 110 Points 100 badge 2x thumb
you gave me the exact info I was looking for.

Thanks
Photo of Ronald Dvorak

Ronald Dvorak, Embassador

  • 50,114 Points 50k badge 2x thumb
I don't have one here but per the installation guide....

"To mount the AP directly on the wall with two screws, use the provided template and mark the two drill holes on the wall."

As far as I unterstand there should be a drill template incl in the box.
Photo of Randy Brown

Randy Brown

  • 110 Points 100 badge 2x thumb
True, i just didn't have one due to this being a replacement. Was just hopefully there was a place online to download. I can just make one no big deal.